Philips OneBlade Pro 360 Face & Body Wall Mount

For the fixing of the comb and the device itself, we need 5 screws m3x8mm. For attaching the guard holder we need m3x20 or we can use glue.


The current files are slightly different from the ones in the picture, I had to do some optimisation.


Print settings:

- 0.20mm layer
- Gyroid Infill 15%. (For the largest part of the print, I recommend using a different filling for the gyroid, which is a waste of time.)

Adaptation to pro version, addition of Comb CP1769 attachment.