raspberry pi 3B articulated stand for camera V2

Didn't like existing camera mounts that require additional hardware or were really bulky, so made my own. The hinges clip together, this requires some force. I don't think it'll work in PLA; I used PETG. I added the Fusion360 source file because the whole thing is still kind of fiddly and others might want to fiddle with the exact dimensions a little. 

I designed everything to print without support or skirt in the correct orientation; use the “plated” file for the whole set.

This thing was made to work with the models I linked under “remixed”: download the Pi case and the front part of the Camera Case. 

The photos don't show the registration marks because I didn't take any of that version. The joints stay in place a bit better with the marks, but this could still be improved.

I didn't do anything to the Pi case; the foot of the camera stand clips into the vent holes.
for the camera case, I only modded the back by adding my clip-in hinges where the mounting holes were, and a registration mark on the bottom of the housing. Download the front part from the original, it's unaltered.