3D printer electronics enclosure (PLATSA compatible)

I created this enclosure to move the electronics of my heavily modified Ender5 out of the PLATSA cabinet that I keep the printer in, since it kept overheating when I was trying to print ABS in the summer.

I designed it to be easy to mount and swap components if needed, and should be at least somewhat extendable.

Here is the project if you want to modify it to suit your needs: https://cad.onshape.com/documents/71f68250a394a2f6437ef9dd/w/a7a5c63353243823834c2f96/e/444f94436fdbe4452eecbe65?renderMode=0&uiState=65b273c34b4eda58d050ee39

Currently supported components (via mounts):

• BTT Octopus
• Raspberry Pi 4B
• Meanwell LRS-350-24
• Meanwell RS-25-5

Fasteners (give or take a few of each type):

• 24 3x16mm wood screws
• 40 M3xD4.6xL5.7 threaded heat inserts
• 2 M3x6 screws
• 36 M3x8 screws
• 4 M3x12 screws
• 4 M4x8 screws
• 4 M2.5x12 screws