Screwdriver Holder Multiboard - Multiple Mounts

I'm building out my multiboard and I like the weight bearing snaps as they feel the most secure for my setup, so I put this one together and am pleased with how it turned out

Details:

Elegoo Neptune 4 Pro

0.6 mm nozzle

15% infill

1.2 mm wall width

Elegoo Rapid PETG in white

101% scaling in all directions for tighter fit

2024.09.23 - Updates

Today I made a couple of updates to this design. 

V1 - Added an option that has a solid connector instead of the small thread connector

Added V2

• In the original version, I use the weight bearing connector from the original multiboard set of connectors. in order to make this work, the bottom of the octagon is actually cut off so that it sits flat.
• In V2, I abandoned the original connector and introduced my Snap Anywhere connector which makes it so that the entirety of the back face octagon can be printed.
• I also introduced the threaded connector. This should be laid out such that the threads tighten down at exactly the right angle
  • The threaded connector also comes with a modifier to support the threads as a portion of the bottom is cut off for ease of printing.

I want to always keep my designs free for anyone who wants to use them, but this does take time and effort. So if my designs are worth something to you, please feel free to buy me a beer

Changed the HSW connection for a Multiboard weight bearing connector.