Cabby Enclosure (Prusa XL) Modified upper fixation parts for Front anti vibration 3030 support

Remodelled left & right upper fixation parts of the cabby enclosure to fit the 3030 front anti vibration support mod.
4
16
0
327
updated January 26, 2024

Description

PDF

Before starting my cabby enclosure build by stevQ https://www.printables.com/model/585697-cabby-enclosure-for-original-prusa-xl I wanted to try the anti vibration mod from SurfAlex2000 https://www.printables.com/model/688831-prusa-xl-series-front-antivibrationsupport-3030-pe but I noticed that the left and right upper fixation parts of the original cabby enclosure would not fit so I went about adapting the original model to now fit the front 3030 extrusion.

The mounting hole has been rotated 90 degrees to sit flush with the front facing extrusion.  You will just require 2 slightly shorter socket cap or countersunk screws M6x8mm should work fine.

I used a 0.4mm nozzle, 0.2 layer height, 4 walls & 5 top and bottom layers.  

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

The mounting hole has been rotated 90 degrees to sit flush with the front facing extrusion.

License