I was searching for an unique dice case, where i can store all dices for dnd and a miniature inside. And so i decided to design my own dice cases, with complex structures for 3d printing.
So far I didn't print the “Leaf"-Version, the other two I printed with a layer hight of 0.15 mm. For a better Top Surface you can also use ironing.
After printing the bottom and the top of your version, you can glue the magnets (dxh: 3,5 x 4mm) in the holes. I used superglue. After this you can cut out a pice of leather (for the dragon and axe box: ca. 18,5x 11,4 mm or ca. 19,3x11,4 mm) in the right size and superglue it on both parts, like in the pictures. If you like to put a pencil in the spine of the dice case, just use a bit more leather and add the straps.
After this or before the glueing of the leather you can burn in one of the designs (or just create an own cover) with an soldering iron.
After this you can glue in the top some foam, so that the box is silent.
I printed it with the following settings:
Printer: Prusa Mini
Layer height: 0.15 mm
Infill: 15%
Ironing: On the Topmost surface
Support: No
The author hasn't provided the model origin yet.