PIXO Pixel Minimalist Case

A minimalist case for the PIXO Pixel, a 16x16 EPS32 Based RGB Display that uses the APA102-2020 LED.

There is only a port for power - buttons and USB programming are covered up with this case, but it could be easily modified to make them more accessible.

Print instructions

Licence: Creative Commons - Attribution Category: Electronics Print Settings

Printer Brand: FlashForge

Printer: Creator Pro

Resolution: .4mm

Infill: 25%

Notes:

Printed in black PETG - should be possible in many materials.

Post-Printing

Assembly Instructions

1) Remove all hardware that came with the PIXO Pixel
2) Screw 4x M3x6 standoffs into the base of the "Case" part and secure with an M3 nut
3) Place bottom board of PIXO Pixel into case, and secure with 4x M3x15 standoffs
4) Place upper board of PIXO Pixel on standoffs
5) Place "Bezel" part on top of upper board
6) Secure with M3 screws of appropriate length (I used M3x12 button head screws)

Plug in power and enjoy!

How I Designed This

Designed in Fusion360 - am happy to share the files/project upon request!