Ergo Keyboard

REQUIRED TOOLS

https://github.com/abstracthat/dactyl-manuform

• FDM 3D printer
• Any resin printer if you want to print your own keycaps
• Soldering iron and conductive solder material
• Keyboard switches, on mine I used brown mx switches
• 2X Arduino pro micro
• 10X M3 heat inserts
• Copper tape (optional, but it makes life way easier)
• Jumper wires
• 1N4148 diodes
• 2X female RJ-9 connectors
• 1X male to male RJ-9 cable

INSTRUCTIONS

For starters, what you just bought primarly are the customazible keycaps, the firmware I’m using, the wrist rests and the know how for I found difficult while doing it by myself; I cannot sell you the 3D model, on the link above you can find the 5X6 model I used, but if you can aswell use the parametric file to generate different layouts.

I’ll tell you every advice I would have needed when trying to create one by myself.

to get my firmware, go on my website to download it

The firmware needs to be installed on both keyboards, the same for both.

The layout is made fot ITA standard, if you want to modify my firmware just go here

https://config.qmk.fm/#/handwired/dactyl_manuform/5x6/LAYOUT_5x6

and upload the firmware to change it