Flexible Motor Coupler (Coupling)

For a small motorized project I needed to connect a stepper motor with a rotating axle. 

I did not have the correct size of Ø10mm to 5mm (with flat side → notch type). So I took an existing coupling and redrew it vie TinkerCad. Printed in PETG, Soft part in TPU. The torque to tranfer is not high for a stepper, so this part will suffice the purpose.

It works fine. And I do not run out of couplings since then. Printed on my Voron 0.1.

Explore my other Printables: https://www.printables.com/de/@Tritschi