Deathly Hallows Project Case

I designed this as an enclosure for the electronics for a Harry Potter themed book nook. The case is made to contain a Raspberry Pi Pico soldered onto a 50x70mm perfboard. 

The case has cutouts for the Pico's micro USB slot as well as one for the any other data wires that may be necessary for the project.

The perfboard can be mounted to the bottom half of the case with m2 screws and the two pieces should snap securely together.

No supports should be necessary.

I used @Henry_309916's Deathly Hallows Pendant model as the basis for the ventilation in the case. I made a few tweaks to the shape of the original model to better suit using it as a negative.