Tesla Cybertruck with Moonroof, Rear Window, and Articulated Tailgate (Snap Fit)

Thank you wov, mrmossevig, Mr_Orange_Juice, the_qsr, Toucan21 for the original models.

Tesla Cybertruck snap fit model with moonroof, rear window, and blank articulating tailgate. Multiple remixes combined with my own addition of new windows and a blank tailgate. This is my attempt to make the model a bit more accurate to real life. The windshield is a little longer than the original, and has an angle cut out of the top edge to help fit with the moonroof. I included all parts I used so that it isn't necessary to download multiple models.

Notes:

I printed the silver body at a 45 degree angle in order to have the first layer have horizontal lines. I used the ironing feature in my slicer for the top layer of the windows to have a smooth surface. If you are printing on glass or a textured surface and want the first layer to be the visible surface for the windows, be sure to flip them in your slicer, as they have a bevel.

Post-Printing:

Super glue and hot glue

I recommend super gluing the windows in and the inner and outer wheel parts together, then using hot glue to bond the silver body to the black frame after using the snaps to combine the front and rear halves of each. Be careful not to use too much super glue as it will haze up the parts if it leaks out.

Tesla Cybertruck snap fit model with moonroof, rear window, and blank articulating tailgate. Multiple remixes combined with my own addition of new windows and a blank tailgate. This is my attempt to make the model a bit more accurate to real life. The windshield is a little longer than the original, and has an angle cut out of the top edge to help fit with the moonroof. I included all parts I used so that it isn't necessary to download multiple models.