Wire Soldering Clip

This is a custom wire soldering clamp to aid you during soldering.

The wires can be clamped with the WHEELS, and adjusted with the ARM.

There are 2 configurations of the tool:

1. A simple configuration where in you can hold the tool in one of your hands.
2. A magnetic configuration, where the GRIP is inserted in the M8 hole of the BASE body. You can glue a d10x10 Magnet in one end of the GRIP. With this configuration, you can mount the tool on a magnetizable metal surface or clamp it in a vise during soldering. If you dont use the grip, you can simple close the hole in the BASE with CAP_2.
   Needed parts:
   1. GRIP
   2. 10x10 Magnet
   3. CAP_2

The two configurations are optional.

I uploaded expanded-,  section-, and transparent views to help you during the assembly.

I also uploaded test models for the treaded interfaces, if you wish to test it on your printer, without printing out the whole model. (the M22 thread was perfect for me for the first time, however the M8 thread needed some adjustments with a simple M8 tap and M8 die)

Bill of Materials:

1 x BASE_threaded / BASE_simple

1 x ARM

2 x WHEEL

1 x LID

1 x BUTTON

1 x CAP_1

1 x GRIP (optional)

1 x CAP_2 (optional)

1 x M5 nut

1 x M5 hex head bolt with max. 70mm length

2 x M2.5x8 socket head screw

1 x 12x1x55 spring (but you can use it with other size spring if it fits)

1 x 10x10 Magnet (optional)