WINE BOTTLE HOLDER DRAGON (2 versions)
Wine bottle holder in shape of a dragon - No supports required, single piece print
This is an exclusive model available only to supporters of the creator.
Your funds support the creator's further activity.
2
0
71
updated
January 30, 2026
Description
3D PRINTING SETTINGS
SETTINGS FOR MODDEL WITH WINGS:
NO SUPPORTS REQUIRED
Print Dimensions: Height = 7.51 inches (19.1 cm) | Base size = 8.82 inches * 6.06 inches (22.4 cm * 15.4 cm)
Layer height: 0.2 mm
Infill type: Gyroid
Infill percentage: 12%
Print speed: 250 mm/s
Print time: 6 hours and 58 Minutes
Amount of material required: ~54.5m
SETTINGS FOR MODEL WITHOUT WINGS:
NO SUPPORTS REQUIRED
Print Dimensions: Height = 7.51 inches (19.1 cm) | Base size = 7.60 inches * 5.67 inches (19.3 cm * 14.4 cm)
Layer height: 0.2 mm
Infill type: Gyroid
Infill percentage: 12%
Print speed: 250 mm/s
Print time: 6 hours and 21 Minutes
Amount of material required: ~49.5m
Tags
Model origin
The author marked this model as their own original creation.