Multicolor Saint Mary's Gaels College Keychain

I used the technique presented by Devon of Make Anything to create a 2.2mm thick Saint Marys College keychain. You can watch Devon's video for details on how to assemble the STL files and print settings to use in Simplify3D. This allows you to create a multi-color print on a single color printer.

Each possible color has it's own STL file and then the 2mm backing is it's own STL as well so you can set that to any color you'd like as well. The first two layers are printed at 0.1 mm layer thickness.

Make Anything video link below that shows how to create a multi-color model, how to assemble the multiple STL files in Simplify3D and the print settings to use.

To get the STL files in the correct position for creating the gcode you do the following in S3D:

1. Load all STL files into Simply3D.
2. If you get a warning about scaling to mm format, select NO.
3. Select all STL files
4. Select EDIT -> Align Selected Model Origins
5. Rotate all the models 180 degrees in the X axis so that the logo is facing against the build plate.
6. Select EDIT -> Drop Model to Table

   Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

0.1mm and 0.2mm

Infill:

Filament:
Multiple PLA Multiple

Category: Keychains