LED Matrix 16x16 - ESP8266 / Arduino - NeoPixel / WS2812b

A NeoPixel / WS2812b controlled LED Matrix with 16x16 Pixels

Easy to print:
Can be printed without support, Filament Type doesn't really matter. I printed mine with PETG, but PLA or something else should work fine as well! I printed the Shader in a white and the rest in a light gray with a 0,6mm Nozzle. I also attached a shader in a 0,4mm Version (for 0,2mm Layer height).

I used a premade LED Matrix, you can get them e.g. here:

• https://de.aliexpress.com/item/4000544411175.html
  or anywhere else :-) Building the Gadget together is quite easy:

• solder an ESP8266 or ESP32 to the LED Matrix

• add the "led matrix holder" between the Microcontroller and the Matrix
• solder a DC Power Jack (5,5* 2,1mm) to the ESP and the Matrix

• add all printed Parts together You should end up with a 'stack' of (back to top)

• Body

• ESP
• LED Matrix Holder
• LED Matrix
• Grid

• Shader Get yourself some cool animations :)

  Print Settings

Printer Brand:

Prusa

Printer:

No

Supports:

200

Infill: