Toilet Stool Aid Stool

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free.

https://paypal.me/muddymaker

Toilet stool aid stool. The benefits of raising your legs while going to the toilet are numerous and have been scientifically proven to work for many people by many scientific studies. I suggest Googling it if you are unaware of this ingenious but simple device.

I've included three quick tolerance test models for the dovetail joins, 0.3mm, 0.2mm and 0.15mm clearance. I suggest you test your printers dimensional accuracy before printing a mammoth print. Find the one that suits your printer's tolerance best and use the corresponding 3mf.

I recommend printing with PETG but any type of filament would work with enough perimeters/walls and infill used, I've only tested this model with PETG at these parameters, 6 perimeters/walls and 5% infill, although you could print it with 0% infill. I found that the above parameters is a happy medium for structural integrity as well as keeping the weight to a minimum and also the amount of filament used. After all, you're only going to be resting your feet on it when sitting on the toilet. Use a little bit of superglue to keep all three parts together.

WARNING: This is not designed to be used as a step because the dovetail joins are the weak points, unless of course you print the entire thing with 100% infill and all three parts are totally superglued.

No supports are required.

Happy printing.