LGX Lite to EBB 36/Picobilical Toolhead Board Adaptor - Voron V0.2

Skeletonized toolhead board adaptor for the LGX Lite. This will fit the EBB 36 and the Picobilical toolhead board.  

The spacer is 16mm long if you wanted to use metal threaded ones from amazon. I kinda recommend it although you can press in 2 threaded inserts into either side of the spacer to get the same effect. 

Items needed:

(2x) M3x25/longer bolts (You'll need to replace the bolts provided with the LGX lite. 25/30/35mm bolts will work)

(2x) Heat Inserts for the board adaptor.

(4x) heat inserts for the spacer columns 

(1x) Skeletonized Board

(2x) Spacer columns 

For installation: I recommend threading the bolts through LGX Lite first, then threading on spacer columns and getting them tight. Installing the toolhead board onto skeletonized adaptor. THEN putting toolhead board onto spacers. 

Like always:

ASA/ABS for material.

0.4 nozzle.

4/5 perimeters.

40% infill 

Grid Infill