Adafruit MACROPAD RP2040 Notched Stands,Holder & Rotary Cover

This is a thing with 2 different stands, holder and rotary encoder cover for the Adafruit MACROPAD RP2040 (https://www.adafruit.com/product/5100) or (https://www.adafruit.com/product/5128). The difference with this design versus my other design/thing (https://www.thingiverse.com/thing:4907617) is that this design/thing has notches on the inside of the stand for the holder that the MACROPAD sits in.The holder that I printed was done in TPU, but I adjusted the tolerances so that you can print in almost any material. On the bottom of the stand, you can use rubber feet (https://www.adafruit.com/product/55) for better traction.

Print Settings

Printer Brand:

Prusa

Printer:

No

Supports:

200

Infill:

Notes: