Radiation shields for DIY weather station

A universal radiation shield for various environmental sensors such as temperature, air pressure or humidity. It is recommended to print the radiation shield from PETG or another UV stable material.

Print instructions

Parts

• 2x Stainless Steel Threaded Rod - 250mm M3
• 3x Stainless Steel Washer - M3
• 6x Stainless Steel Hexagon Nuts - M3

Assembly

• Print one of the Bases (Normal, V2 or V3)
• Print Top
  • Use 4 vertical perimeters
  • Pause while printing to insert nuts
• Print Rings depending on your needs
  • Use 4 vertical perimeters
  • I printed six rings
• Cut the threaded rods to your needs. Some tips:
  • The top hole is 6.8mm deep
  • Each ring needs 12mm
  • The base needs 12.5mm
  • Add some space at the end for the nuts and the washer
  • With six rings I shortened the threaded rods to 100mm

Links
The links to AliExpress are advertising links. I would be happy if you use this link, but of course you don't have to. I have linked exactly the offers from which I have also bought and was satisfied with the supplier and the goods. The products can of course be bought anywhere.