Wall swallows decoration (Voronoï & porcelain like)

Wall decoration in the swallow shape, in the way of the porcelain that already exists in this type of design. The size is 18 cm and I've made it in two versions, one of which is voronoï to give it a lighter look and let the light through (see the 3d render and the real photo).

The idea is to hang them in a right-to-left direction, with the right wing close to the wall and the left further back. This gives more movement.

• Voronoï version :

It's best to print it on his belly, without support and with layers of 0.12. A border is essential so that it fits on the bed (this part won't be visible once on the wall). I've uploaded a photo to show you the final print. I didn't slow down the printing, but better results could be expected with a slower print. Since this version already has (several) holes, you're free to hang it wherever you think best.

• "Porcelain-like" version:

This time I decided to print it in the position in which it will be on the wall, so as to have two points of contact. Use adaptive layers, overall 0.12 and thinner on the top (0.1) to minimize the stepper aspect.
Rectilinear filling is fine, with an amount of 10-12%.
2 wall layers are OK.

In my case and in both cases, I prefer PLA materials. I think several post treatments are possible and I hope you'll enjoy sublimating them.

Please let me know if there is some issue or request.