Zipper Pull - Connector

Suggested print settings:

• Layer height 0.2mm.
• Infill 50%.
• Perimeters: 5.
• Refer to the image for print orientation.
• No supports needed.

Choose which side (Zipper Pull) you'd like the connector piece to stay, and insert the longer end all the way in. Slight force may be needed.

For more interesting zipper pull charms, be sure to track this tag (Zipperrific).

NOTE
Most of our designs are printed and tested on a Prusa Mini and MK4, so tolerances may vary if you are using a different brand. While we strive for a smooth experience with our designs, we appreciate your understanding if tolerance issues arise.