Universal Adjustable Boom Camera/Phone/Microphone Mount

This is a universal adjustable boom mount with vertical and horizontal adjustments, utilizing basic dowel and hardware from your local store. The fittings follow standards for hex based M5, M3, and ¼" bolts and hardware and a 1" dowels or OD circular pipe. The base is weighted with sand for additional stability.

Should work reasonably well with 25mm for international users but may need a bit of glue/tape to keep it secure.

Hardware:

2x 1" Dowel of preferred length (30" maximum recommended, depends on weight of whatever is mounted)

2x M5 x 25mm bolts or longer

2x M5 Hex or Nylock Nuts

1x M3 x 30mm bolt or longer

1x M3 Hex or Nylock Nut

1x ¼"-20 x 5/8" long Hex Bolt

1x Sand or Gravel for base weight.