KLP1 LED light bar housing + diffuser

KLP1 is a good printer and packed with nice features, Sadly the acrylic panels are tinted which make things hard to see.

I made LED housing and diffuser for any 8mm LED strip, instead of buying the kit from Kingroon, you could buy a quality LED strip and print your own housing.

The housing has 4 holes on each corner to feed the power wires for more convenience.

I recommend COB LED strip for more uniform light.
https://www.aliexpress.com/item/1005006358747304.html

Use quality double-sided tape to fix the housing on the panel under the XY belts like the picture #3

LED specs: must be 24V to connect it directly to the power supply, or use 12V or 5V LED with DC-DC converter

Optional stuff: 
24V PWM controller for dimming the LED or button
https://www.aliexpress.com/item/1005006361884484.html

inline fuse (to prevent accidental shorting)
https://www.aliexpress.com/item/1005005471789734.html
or
https://www.aliexpress.com/item/32691175691.html

The provided installation picture is from the Official Kingroon not mine, always check your powersupply, don't attempt if you are a novice.


Print Settings:

LED housing
0.2 resolution
15% infill
supports on

LED diffuser
0.2
10~15% infill
ironing top layer