Oral B Toothbrush stand for 2

Redesigned in Fusion 360 for 2 stands closer together, .stl and Fusion 360 .step file included.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

0 or whatever you prefer

Filament: BQ PLA white

Notes:

Sliced in Cura, print on its side, I've printed one with raft and one with brim, both worked, use what you feel comfortable with.

Layer height: 0.2mm

Line Width: 0.355mm (odd I know but means the edges fit 3 lines which is quicker than "fill between walls")

Initial layer line width: 100% (else first layer edge isn't 3 lines)

Shell wall thickness: 1.2mm (wall line count 3)

Optimize wall printing order: ticked (doubt it matters)

Infill: I used 10%, zero does also work I think

Support: Touching build plate only,

Support angle: 70%

Support density: 15%