@MyStoopidStuff I'd love it if you could make them for those 3 split bins. Especially since the M2's are tiny and sometimes manage to get into the cracks as they're not entirely sealed by the main lid.
@Ch3vr0n It was difficult to make the covered bins, since I was working with the STL (and my CAD program has great difficulty editing STL's). If you have the STEP or IGES for the unlabeled 3 split bins, I'd have a look to see if it could be done. Even with the files though, unfortunately I can't say when I'd get to it at this time.
@Ch3vr0n Unfortunately STL->STEP is a problem since the file that results causes problems with my CAD tool. My CAD app can deal well with STEP or IGES which are exported from the original model, but chokes when given files that were converted from an original STL. The software I used (ViaCAD) is able to convert some STL->solid models which it can work with, but those also cause problems when actually trying to do much with them (crashes and failures to do cuts or adds with the model sometimes).
Edit - just posted the remix for the 6 slot 4x1 bin. (edited)
Great bins, thanks for posting these!
@MyStoopidStuff You made lids for i was wondering about a solution to that. Link please.
@Ch3vr0n It's not yet posted but will be (as a remix) in the next day or two. I have to test a small change to allow fitting a 9mm label on them.
@MyStoopidStuff I'd love it if you could make them for those 3 split bins. Especially since the M2's are tiny and sometimes manage to get into the cracks as they're not entirely sealed by the main lid.
@Ch3vr0n It was difficult to make the covered bins, since I was working with the STL (and my CAD program has great difficulty editing STL's). If you have the STEP or IGES for the unlabeled 3 split bins, I'd have a look to see if it could be done. Even with the files though, unfortunately I can't say when I'd get to it at this time.
@MyStoopidStuff Openscad can only export to STL/OBJ/OFF/WRL/AMF/3MF/DXF/SVG/CSG/PDF/Image. But stl's can be imported into FreeCad i believe which in turn can export to STEP. https://www.youtube.com/watch?v=jVcTpP3qqX8
@Ch3vr0n Unfortunately STL->STEP is a problem since the file that results causes problems with my CAD tool. My CAD app can deal well with STEP or IGES which are exported from the original model, but chokes when given files that were converted from an original STL. The software I used (ViaCAD) is able to convert some STL->solid models which it can work with, but those also cause problems when actually trying to do much with them (crashes and failures to do cuts or adds with the model sometimes).
Edit - just posted the remix for the 6 slot 4x1 bin. (edited)