EMS GBT Airflow Cart Cord Control Holder

Having the best way to perform hygiene visits in my office is amazing. EMS GBT Airflow has been the best thing to come to the hygiene department in 50 years. We have the GBT carts, which I highly recommend. But in the times we need to get the unit out of the way, we found out very quickly that there is no cord management on the unit. So what ends happening, the cords are draped over the unit. BAD, that means cords that have been on the floor are now on the top of the unit. I designed this cord holder to be placed on the back of the unit without altering the unit. A little double side tape holds it into place.

Notes:

1. Import the STL into your slicer
2. Should be placed on the print bed on its side
3. Print with 5 or more perimeters. I just printed in PLA or PETG
4. Attach a couple pieces of double sided sticky tape on the back of the holder
5. The top of the holder should insert into the space between the metal strip on the back of the cart and the GBT unit. (you may have to loosen the GBT unit a little to get the holder into the space)
6. Push the holder onto the cart.
7. Enjoy