Case for the Mutable Instruments Ambika Synthesizer
The case has an angled stand which eases the access to the button and knobs and optimise the view angle on the display.
1
52
0
331
updated
January 21, 2024
Description
PDFThe case for the Mutable Systems Ambika Synthesizer can be printed on a standard 3D printer with a minimum bed size of 25x21cm. Additional to the 3D printed parts only following items are required:
- 4 pcs. 3mm (Eurorack) square nuts with screws (if not available, the case could be also glued together)
- Glue (I recommend Cemedine Super-X glue)
The parts are designed to be printed with almost no support required. Only the back panel needs minimal support from the bed.
More information can be found here: https://spillerphoto.com/blogs/synthesizer/ambika-synthesizer-stl-file-for-3d-printed-case
Tags
Model origin
The author marked this model as their own original creation.