Krusty Burger Logo - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyTerra Lava Red Transmission Distance: 1
PLA PolyLite Green Transmission Distance: 1
PLA PolyTerra Lava Red Transmission Distance: 1
PLA PolyTerra Sunrise Orange Transmission Distance: 2
PLA PolyTerra Cotton White Transmission Distance: 2.5

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Lava Red
At layer #11 (0.96mm) swap to Green
At layer #13 (1.12mm) swap to Lava Red
At layer #14 (1.2mm) swap to Sunrise Orange
At layer #17 (1.44mm) swap to Cotton White for the rest.

If scaling, do NOT scale the Z axis. 

Please post your makes!