Prusa Base Vibration feet

A TPU base feet that reduces the vibrating resonance from the printers original feet. Printer raised 22mm from the ground.

Made for the Prusa i3 MK3S+. But it will fit the Aluminum extrusions.

Printed with TPU at 15% fill (Iv added a file with 80% fill for the top half, but so far the print is strong enough without)

Quality: is at 0.15 but I printed in 0.20 and still works.

Print Time: (x1; 45m) (x1 80% top infill; 46m) (x4; 2h26m)

Support: Build Plate only (print upside down)