Raspberry Touchscreen + Raspberry PI 4 + feet

I redesigned the LCD & Touchscreen front panels to be fitted on Prusa MK3S+.
The LCD & Touchscreen support will mount using the same screws of the original, but be aware that you need to immers the nuts (M3) during the printing.
I fixed both covers (LCD & Touch) on the support using the bolts (M4) 10mm & M4 nuts.
I fixed the Raspberry touch in the cover using the 4 screws (M3) 18mm.
To power the Raspberry PI 4B I used the Down Control Module LM2596 connected directly to the 24V of the Prusa PSU.