Ender 3 Large ToolBox

Introducing The Large ToolBox for the Creality Ender 3.

Ever wanted to stuff all of your 3D Printer's Accessories in one safe and reachable place? Well now you can! Introducing the Large ToolBox for the Creality Ender 3!

Since this ToolBox takes up all of the room in front of the printer we have repositioned the electronics case and mainboard using this model from Teaching Tech: https://www.printables.com/model/180138-ender-3-all-in-one-universal-rear-electronics-case 

NOTE:
If you have a bigger printer you can print the drawer with the bottom touching the Build plate but if you only have an Ender 3 you will have to use supports and print with the front or back part touching the build plate.

RECCOMANDATIONS:

• Print with PETG, ABS, PC, etc… for more temperature resistance 
• In PrusaSlicer (and most other slicers) → Print Setting → Layers and perimeters → Avoid crossing perimeters: ON (to reduce stringing)
• Print with at least 5% Infill
• Print with at least 3 Perimeters
• We recommend using a brim or a bit of glue when printing the case or the drawer part