Beretta PX4 Storm - Magnetic Mount

Magnetic mount for a Beretta PX4 Storm.

This is made from scratch, but I got the idea from utahmini and this is heavily based on his design. Like his, it also allows you to push the pistol forward, holding the slide in place.

The magnet slot is 60x10x5mm.
I filled it with 24 5x5x5 magnets. Holds the gun very well but it's still easy to remove.

Use M4 screws to mount.

Prints @0.2mm with no supports. I used PLA and it's holding up great.