Wall mounted holder for JBL Charge 5

There is  no vibrations left compared to placed it on the desk. Resulting in better sound, especial near by.

It never slipt off the holder.

My Settings: 

JBL_Wallmount_ST, JBL_Wallmount_RW, JBL_Wallmount_STU_LI_RE

0.6 Nozzle

0.35 LH

15% Infill

JBL_Wallmount_AD

0.2 LH

You will need:

6 threaded brass inserts M3 

6 M3 Allen screw 10-16mm long (the holes are deep enough)

4 Magnets for the _AD file. (I had only 5x5x2mm left over, so i used those)

4 Screws to mount it on the wall