Prusa Mini display backplate - Upgrade
A simple panel that can be screwed onto the back of prusa mini display case. (1 hour print)
485
2277
143
7939
aktualizováno
3. srpna 2021
Popis
PDFPrusa Mini LCD backcover
Print on it's flat face with supports
Installation:
First, unplug the LCD display cable on the back of the PCB. Then remove the 4 m3 screws holding the PCB in place, and slide the printed cover panel in. Reinstall the 4 screws and tighten gently. Finally, plug the display cable back in.
Štítky
Původ modelu
Uživatel se označil za původního autora tohoto modelu.