A laptop stand is used to hold a closed laptop vertically. Can be placed on your desk or mounted on a wall (there are two 5mm holes on the back for this). Laptop space width - 35mm
I hope you enjoy it :)
Material: | PLA/PETG/ABS |
Layer height: | 0.1-0.2mm |
Nozzle: | 0.4mm |
Speed: | 60mm/s |
Infill: | 30-50% |
Print time: | 15 hours |
Filament use: | 240g |
The author marked this model as their own original creation.