Designed to fit the CHLORANTHUS Cordless Table Lamp, available on Amazon. Not an endorsement, and I have nothing to do with the company - but it seemed like a good one for the price that we were willing to pay.
Non-affiliate link: https://www.amazon.com/CHLORANTHUS-Cordless-Control-Stepless-Rechargeable/dp/B0C36SGCTV?pd_rd_w=Ypa22&content-id=amzn1.sym.80b2efcb-1985-4e3a-b8e5-050c8b58b7cf&pf_rd_p=80b2efcb-1985-4e3a-b8e5-050c8b58b7cf&pf_rd_r=JFSPNT2D5G4CVF4T8QQT&pd_rd_wg=ZMKAk&pd_rd_r=31fcddb9-9cfa-491f-a2da-f3001dfeb4ba&pd_rd_i=B0C36SGCTV&psc=1&ref_=pd_bap_d_grid_rp_0_1_ec_pd_nav_hcs_rp_1_t
Printed okay on an AnkerMake M5 without supports, in the orientation that I have submitted. Brims were used. 100% infill, usual fine printer settings otherwise. Some deformities in the base are present with my printer, but they're not terribly visible unless you inspect for them. If you turn it upside-down to print it (why?), you will need supports.
Contains a readme file containing settings for lithophanemaker.com, if you wanted to use your own artwork, and split the model yourself.
The author marked this model as their own original creation.