After making my first DUMMY 13 to scale, I wanted a bigger one. I scaled the model parts up to 200% in CURA and got to work. Through trial and error, I needed to make adjustments to 3 parts.
1 - The hands will not print (for me). Scaling up breaks the print for me. I made crude fists just to get the job done (I plan to make a more polished version at a later date).
2. The waist and crotch needed to be resized in a couple areas to fit together properly.
3. I used Mici's hips/shoulders remix since I had issues with them on my first print; these scaled fine at 200%.
Everything else scaled fine; the print was easier and turned out better than at it's original size.
Printing Notes:
FRAME: PETG @ 0.15mm (0.2mm first layer) | 3 walls | 30% infill
ARMOR: Inland SILK PLA (Purple/Gold) @ 0.2mm | 2 walls | 20% infill
The author remixed this model.
1 - The hands will not print (for me). Scaling up breaks the print for me. I made crude fists just to get the job done (I plan to make a more polished version at a later date).
2. The waist and crotch needed to be resized in a couple areas to fit together properly.
3. I used Mici's hips/shoulders remix since I had issues with them on my first print; these scaled fine at 200%.