The original model by @MagnusT serves as the basis, which, like the Smallest possible ESP32-CAM (Taller remix) by @mdzi, was enlarged to 17mm height. This means that the ESP fits into the housing with its legs. Unnecessary contours and openings were removed and the camera opening was moved downwards by 0.7mm (suitable for my ESP).
The cover frame has been widened and lengthened so that it holds securely on the housing.
The clamp was extended and the holes were adapted to the PLATSA hole grid.
The board runs code from johnyH!
----------------------------------------------------------------------------------------------------------------
Als Basis dient das originale Modell by @MagnusT, welches wie beim Smallest possible ESP32-CAM (Taller remix) von @mdzi auf 17mm Höhe vergrößert wurde. Somit passt der ESP mit Beinchen ins Gehäuse. Nicht benötigte Konturen und Öffnungen wurden entfernt und die Kameraöffnung um 0.7mm nach unten versetzt (Passend für meinen ESP).
Die Fassung des Deckels wurde verbreitert und verlängert, damit dieser sicher auf dem Gehäuse hält.
Die Klemme wurde verlängert und die Löcher auf das PLATSA Lochraster angepasst.
Auf dem Board läuft der Code von johnyH!
----------------------------------------------------------------------------------------------------------------
The author remixed this model.
The original model by @MagnusT serves as the basis, which, like the Smallest possible ESP32-CAM (Taller remix) by @mdzi, was enlarged to 17mm height. This means that the ESP fits into the housing with its legs. Unnecessary contours and openings were removed and the camera opening was moved downwards by 0.7mm (suitable for my ESP).
The cover frame has been widened and lengthened so that it holds securely on the housing.
The clamp was extended and the holes were adapted to the PLATSA hole grid.
----------------------------------------------------------------------------------------------------------------
Als Basis dient das originale Modell by @MagnusT, welches wie beim Smallest possible ESP32-CAM (Taller remix) von @mdzi auf 17mm Höhe vergrößert wurde. Somit passt der ESP mit Beinchen ins Gehäuse. Nicht benötigte Konturen und Öffnungen wurden entfernt und die Kameraöffnung um 0.7mm nach unten versetzt (Passend für meinen ESP).
Die Fassung des Deckels wurde verbreitert und verlängert, damit dieser sicher auf dem Gehäuse hält.
Die Klemme wurde verlängert und die Löcher auf das PLATSA Lochraster angepasst.
----------------------------------------------------------------------------------------------------------------