The model consists of 3 parts that have to be printed individually. You can also print just the main body, without a frame at the top and bottom. No support material is required.
To increase bed adhesion you can add a brim.
I printed it without a brim.
I carefully removed the sringing on the top frame with a lighter.
Layer: 0.2
Nozzle: 0.4
PLA: 1.75
Infill: 15% Gyroid
My printer: Prusa MK3S
Slicer: PrusaSlicer 2.7.1
Print profile: 0.2mm QUALITY
If you have any questions, please feel free to contact me
Have fun with your Table Organizer!
The author marked this model as their own original creation.