SAPPHIRE | Knife Rack, knife block

SAPPHIRE | Knife Rack

Introducing our SAPPHIRE large-capacity knife block (10 knife slots), a rounder version of our OBSIDIAN Knife Block designed to ensure your knives stay dry and are stored safely within arm's reach.

There are 5 rows of 2 slots each. Top row: (W40mm) large openings for kitchen scissors, or knife sharpeners 2nd row left slit: (W80mm) for butcher knife or Chinese chopping knife 2nd row right slit: (W55mm) for chef knife 3rd row: (W60mm x2) for regular mid-size kitchen knives or chef knife 4th row: (W50mm x2) for regular mid-size kitchen Bottom row: (W40mm x2) for boning knives or paring knives

Make your kitchen shine with a touch of elegance and a whole lot of practicality!

DIMENSIONS | W 180mm x L 215mm x H 250 mm

3D PRINT SETTINGS Resolution: 0.2mm / layer or less

Wall lines count: 2

Build adhesion type: Not need for a brim, unless you have adhesion issues. If so then use a 6~8mm brim.

Infill: 15~25% gyroid

Supports: None (if printed on the side)

The knife block was designed so it could be printed 100% without supports if, and only if, it is printed on the right side or left side face (see pictures).