Robotech/Macross - Hueforge

Robotech/Macross - Hueforge

The first anime I ever watched and holds a special place in my heart.

Please follow below instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Kingroon Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 5
PLA Kingroon Yellow Transmission Distance: 5
PLA Kingroon White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #13 (1.12mm) swap to Yellow
At layer #16 (1.36mm) swap to White for the rest.