Rolls Razor blade honing handle

A very simple offset handle with a flat side for use when manually honing Rolls Razor blades. To use and maintain the proper blade angle, simply use a small piece of electrical tape and tape the handle with the flat side against the back of the blade's spine ( see pictures ). Now you have better control when rolling the blade on the sharpening stones. Use the handle with one hand for rolling the blade and the other hand's thumb and index finger for pushing and pulling along the stone. Please post your makes. Enjoy

UPDATE: 1.29.24
Added file "Kampfe_Star_Razor_blade_honing_handle.stl"
The shaft on this handle matches the spine of the Kampfe Wedge blades and others.

Print Settings

Printer Brand:

Kingroon

Printer: 

Kingroon KP3S

Rafts:

No

Supports: 

No

Resolution:

0.2

Infill: 

100%

Filament: Duramic 3D PLA+ Black

Category: Bathroom