MT-SYSTEM Door for Cabinet L: Version HANDLE/240mm (Tür für Schrankfach Gr. L)

These door is made for the MT-SYSTEM cabinets with door.

THIS MODEL is an alternative version WITH HANDLE.

MOUNTING: 
The doors are mounted dead easy with a piece of standard 1,75mm filament. If you want you can aditionally put a drop of glue on the top end but it is not really neccessary. Try it out.

DOOR Options: 
You will find all different kinds of DOORS for separate download here, too. The below mentioned doors are just the standard doors. Have a look at the MT-SYSTEM Cabinets with doors COLLECTION to get an overview: 

https://www.printables.com/de/@MakerTeam/collections/1155897

Doors width: 240mm

Material: PLA
Layerheight: 0.3mm or better
Infill: min. 15%

RELEASED MT-SYSTEM COMPONENTS

All up to now released MT-SYSTEM components are part of a special collection like…

• MT-SYSTEM Cabinets with rolling shutters
• MT-SYSTEM Cabinets with doors
• MT-SYSTEM Boxes & Drawers
• MT-SYSTEM Holders & Hooks
• MT-SYSTEM Trays & Inlays
• to be continued…

You can find all previous collections here: https://www.printables.com/de/@MakerTeam/collections

WHAT IS IT ALL ABOUT?

We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. Here on Printables we offer a lot of stuff for free so have a look and pic YOUR individual endowment. You can also visit our webshop under www.makerteam.de to find all of these parts to buy in already printed and ready-to-use versions incl. mounting material. If you miss anything please let us know. We are always comitted to extend the system. Thanks.

MOUNTING THE MT-SYSTEM:

The MT-SYSTEM is made to be mounted to 20x40mm T-slot aluminium construction profiles (link1) by using M4 screws (link2), M4 slot nuts (link3) and sometimes also magnets (link4). If you miss anything please let us know.

Link1: https://makerteam.de/en/search?search=profile
Link2: https://makerteam.de/en/search?search=Linsenschraube
Link3: https://makerteam.de/en/search?search=slot+nut
Link4: https://makerteam.de/en/search?search=magnet

HOW TO PRINT?

All MT-SYSTEM components are designed to be printed out in PLA or PETG on 02mm layer height. They are very stable but some parts like holders for heavy equipment (cordless screwdrivers) should be printed in PETG with a minimum infill of 40%.

SPECIAL ITEMS:

The MT-SYSTEM is much more than these few parts here at Printables. If you need special equipment like battery holders for FESTOOL, MAKITA and other unique stuff please visit our webshop: https://makerteam.de/3D-Druck/3D-Produkte/MT-SYSTEM/