Bambu Lab P1S/P1P tool head cover

THIS IS FOR ENTHUSIAST USE ONLY!

This model has been eyeballed together by myself in Fusion 360, using nothing but a pair of calipers, and lots of squinting. I will not be providing an STL, STEP, or 3MF file for this part, as only those familiar with Fusion 360 and are competent with it are to attempt to use this part.

I STRONGLY ask that you remix this model, to fix up any/all issues with it, and expand upon it to make it stronger, reliable, expandable, practical, etc. 

A fully integrated part cooling duct + head cover is what I imagine for this part, including options for a fixed mount hot end fan, etc. but I am unfortunately not the right person for that task.

Some known issues with this part:

• There's random cuts on the front lip due to my inability to make 3D sweep cuts.
• The top magnet holes kinda just float there, because I couldn't work out how to not have the tubes for the magnets protrude through the face of the cover.
• The screw holes may be too big, or too small, and are sorely in need of some brass insert support.
• The fillets on the bottom two ‘tabs’ are in the wrong spots and are the wrong shape.
• The chamfers on the face and top do not match the OEM part, and I'm not sure if they absolutely must or not.
• The vents on the upper side are not like OEM, because I couldn't work out how to replicate the shape, but I also question why these vents are here in the first place, as the P1S does not have the LED light-up BL logo circuitry (which is also NOT accommodated for in this model).
• Tolerances around the magnet holders are also questionable, and may need post processing or fixing in Fusion.
• The order of operations in this model are somewhat all over the place.