Tina 2 Full size spool Holder

I got a Tina 2 Basic for review, and it needed a full size spool holder badly, V2.5 is live and the better option. Link below. There are some out there, but I found they all had some issues. So I made this to tackle a few of those issues. I moved the post further out, because the three I tried first all had the spool hitting the extruder lever. I Fileted all the corners so it resists corner lifting during printing. It is too tall to print on the TINA 2. So you will need another printer to print this, But I am in the process of designing one that is two pieces and will be printable on the TINA 2. I made it just as strong as the others, but reduced needed filament.

V2 is being printed to test now. It can be printed directly on the TINA 2. I will update this to reflect it's being posted.  If you appreciate the design you can always tip on paypal @CryptoDestro      V2 is live and can be found here. Has gcode and tuned profiles for the TINA 2/2S                                                                                         https://www.printables.com/model/734087-tina-2-spool-holder-v25

You can follow me on Twitter/X @TweetThreadFred  Instagram @3nt4ngl3  Facebook  www.facebook.com/inT4ngl3  I do do custom design work if you need that.

I print things to be strong so I use 5 walls and 25% infill. I run Klipper on all my printers and that means i can't upload gcode here, as the macros get flagged. 

If you appreciate a tip would always be welcome. You can PayPal me @ paypal.me/CryptoDestro

or even send crypto to

BTC         15gP96C6YkBPdhnUStKVUU1LyjonVnXhe2

Solana     4X1romUPhZHLVhoKrdcJ76NTik9UgmQeEsxxYANYc3Jb

Matic       0x3010FEA7c5A0E7D62740ad742a27cFf14B07387d

Litecoin   LPuLQJVvdQRStWUdd2JnkV57BxB4cGiGnh

ETH         0x3010FEA7c5A0E7D62740ad742a27cFf14B07387d