Deck Holders Collection

This set of 24 deck holders is designed to be used as dispensers for your card games or board games. They are compatible with the most common card formats, including American or European sizes, and can accommodate sleeved cards.
 

A notch in each slot facilitates the removal of the deck of cards or drawing from the end of the pile. The stack of cards rests on a slightly sloping side (10°) to prevent it from collapsing.

It comes in two card dimensions, small and large, with one to four slots and three heights, SMALL, MEDIUM and LARGE.

Maximum slot capacity varies depending on height. Keep in mind that this capacity may increase or decrease depending on the thickness and quality of your cards.

For cards with sleeves, divide this capacity by approximately 1.5 or 2, depending on whether standard or premium sleeves are used.

They are easy to print and don't require too much filament. Enjoy!