Stand for Wurth Activator and Glue

Hello Everyone

I designed the stand for Wurth products suitable for the Cyanoacrylate Glue Activator with a capacity of 150ml 0893 301 20 and for the Klebfix Easy Pen Cyanoacrylate Glue with DOS System 30grams 0893 090 030. In the middle of the stand there is also a small organizer which I use for cleaning cloths and disposable plastic needles for precise glue dosing. The hole diameter for the Activator is 53.2mm and for the glue 42mm. You can download a file in *.STL or *.3MF format which contains a model with a colorful logo.

When you complete the project, please share a photo and a comment. Thank you and have a nice day.

IMPORTANT - READ :
Please note that each printer is calibrated differently, has individual user settings, and each uses a different type and manufacturer of filaments.  I tested the project on PLA filaments from brands such as Bambu Lab, Fiberlogy and Polymaker. Each time the size after printing was perfect for the Wurth Stand. Download a file for a size test print.
 

How to print ?  :

• Material : Any (I tested with PLA)
• Layer Height : 0.2mm
• Wall Loops : 2
• Top Layers : 4
• Bottom Layers : 4
• Support : No
• Brim : No