Voron V0 Print Sheet Holder

I created a simple print sheet holder for my new Voron V0.2r1.

It holds 3 sheets.

I have provided 2 STL's 

One for 3 times a 120mm x 120mm sheet with a 1mm thickness.

And one for 3 times a 125mm x 125mm sheet with a 1mm thickness.

Currently the STL will be to large to be printed on the V0 itself.

I'm trying to figure out a way to break the print into parts so it can be printed on a V0.

To make it applicable to more than just the Voron V0 family of printers I added parameters to the Fusion file.

All sheets can be resized individually.

The parameter Sheet_*_Size is for the XY size for your print sheets.

As the size  in between the holder blocks is 110mm the smallest size is about 114 mm.

The largest size is about 130mm.

The parameter Sheet_*_Thickness is for the thickness of your sheets.

The max thickness is about 1.5mm.