Nitrokey Storage V2 spare housing (MMU Logo support)

My Nitrokey Storage V2 housing broke recently, so I decided to print a new one.
I couldn't find a ready to print model, so I used my rudimentary FreeCAD skills to create one myself. 

To assemble this print, you will net 4x M2x8mm bolts and the corresponding nuts.
Depending on your printer, you may have to scale this print a little.
I got a tight fit without resizing.
This model can be printed as multi material model or by manual filament swaps to achieve the different colors as seen in the photos.

I'd love some Feedback and you are welcome to remix this model ;-)

Lastly, I would like to thank Nitrokey for allowing me to use their logo inside this model.