Mount for CRICKIT

Parts list in Learn Guide:
https://learn.adafruit.com/mount-for-crickit/

3D Printed Mount for CRICKIT
Do you want to secure the CRICKIT board to your project? Then this mount is for you! This 3D printed mount is a general, multi-purpose mount designed to house the CRICKIT PCB with M3 machine screws. It features slots for attaching to surfaces and things. The low-profile design has openings for all of the various ports and terminal blocks allowing room for cables and wires.

Add-On Attachments
The mount is designed to fit various add-ons like for tripods and battery packs. The center of the mount allows for these add-ons to snap fit and lock. So you can swap out different add-ons without having to use additional hardware. This allows the mount to be reused. You can also design your own custom add-ons!

Adafruit CRICKIT for Circuit Playground Express
https://www.adafruit.com/product/3093

Circuit Playground Express
https://www.adafruit.com/product/3333

4 x AA Battery Holder with 2.1mm Plug and On/Off Switch
https://www.adafruit.com/product/3788

Print instructions

Unassociated tags: circuit playground
Licence: Creative Commons - Attribution Category: Robotics